You're Here ::
ISOLATOR SWITCHES – ENCLOSED IP53 - IP55 - IP65• 90° switching angle. • Forced open Contacts. • Terminal screws in open position. • Finger protected (degree of protection up to IP20) . • Short-circuit rating. • Fulfils the load break requirements up to 690V or up to 1000VIEC 60947
Isolator switches IP55 incorporate three or four pole manually operated load break switches which make and break on load and provide isolation for any low voltage electrical circuit. The enclosure provides protection against contact with live parts as well as environmental factors such as dust, water and other hazards.AdvantagesSafety of operationsDoor interlocking and positive break indication provide increased safety for the operator.Inductive load breaking (AC23)This enclosure range is provided with SIRCO M and SIRCO type load break switches which are adapted to highly inductive loads.Complete rangeThe range offers a wide variety of variants depending on the number of poles, rating and enclosure type.
FUNCTION• Automatic Transfer Switch - ATS. • Compact Design. • Mechanically interlocked switching. • Connection blocks supplied for external logic control. GENERAL CHARACTERISTICS• Adapted to mechanical risk and dust hazard. • Protection degree: IP54• Colour: RAL 7035. • Connection of cables:Top or bottom flat connection from 125 to 250A, top from 400 to 1600A. • The auxiliary contacts are wired to a terminal block. • Material: steel thickness 2 mm. • Coating: epoxy polyester powder. • Wall mounting: 4 wall mounting brackets supplied - not mounted (range = 400A), floor standing feet (range > 630A). • Door: solid with hinges. • Locking system: 3 mm double-bar key (key supplied). • Miscellaneous: 2 bolted earth connection points, 2nd auxiliary contact, solid neutral, 400/230 VAC transformers (one on each input), padlocking in 3 positions.CONFORMITY TO STANDARDS: IEC 60439-1
ENCLOSED FUSE SWITCHES IP55FUNCTION • Emergency breaking. • Protection against overcurrents. • Breaking for mechanical maintenance. • Safety isolation in the vicinity of any low voltage final circuit. GENERAL CHARACTERICS• Adapted to mechanical risk and dust hazard. • Handle: S-type black handle padlockable. • Protection degree: IP55 / Ik 10 (IP65 on request). • Colour: polyester powder RAL 7035. • Cable gland plate: bottom (range = 63 A), top and bottom (range > 100 A). • Material: XC steel, thickness 1.5 or 2 mm. • Coating: polyester powder. • Wall mounting: 4 holes in the back of the casing. • Solid door with hinges. • Locking system: 3 mm double-bar key (key supplied). • Miscellaneous: 2 earth connection points, disconnectable solid neutral link for 3+N, extension boxes for top and/or bottom connections available, IP20 incoming terminal shrouds.
The enclosures are made with high quality materials in cold-rolled steel plate of up to 2mm thick and coated with RAL 7035 hardened epoxy-polyester paint. The Busbar Chambers, rated at 250A and 400A, contain a 3P &N busbar system comprising 5mm thick flat copper busbars mounted on isolated busbar supports with a protected cover TECHNICAL DATADegree of protection: IP55Resistance to impact: IK09Range of temperature: -25/+40°CCurrent Ratings: 160A, 250A, 400AEN 62208; EN 60439-1-3; 2006/95/CE directive
SAFETY SWITCHES – ENCLOSED IP65Polycarbonate Safety Switches• 90° switching angle. • Forced open Contacts. • Terminal screws in open position. • Finger protected (degree of protection up to IP20) . • Short-circuit rating. • Fulfils the load break requirements up to 690V or up to 1000VIEC 60947IEC 60204-1 EUL 508SIRCO M Polycarbonate SwitchesPolycarbonate enclosure• Equipped with a 3 pole SIRCO M. • 1 removable neutral terminal and 1 removable earth terminal. • 4 M16 pre-drill holes. • 8 M20 / M25 pre-drill holes. • Protection IP65. • Possibility of adding 1 additional pole. • Possibility of adding 1 M type auxiliary contact module.
Garo Fuse switches incorporate three or four pole manually operated fuse combination switches which make and break on load and provide isolation and protection against overcurrent for any low voltage electrical circuit. The enclosure provides protection against contact with live parts as well as environmental factors such as dust, water and other hazards.AdvantagesSafety of operation• Positive break indication and door interlocking.• Short-circuit and overcurrent protection.• Complete isolation of the fuse with double breaking per pole (top and bottom of fuse).• Protection to personnel against contact with live parts.• Protection against environmental factors.Suitable for use in a variety of applicationsGaro fuse switches can be fitted with different types of fuses (gG, aM, UR) with high breaking capacity, enabling them to be utilised in a variety of applications.